Filter By:
- Bar Ends (21)
- BMX (71)
- Bottom Brackets (278)
- Brakes/Levers/Pads (1091)
- Cables (280)
- Cassettes/Freewheels (237)
- Chainrings (317)
- Chains (189)
- Show More Categories
- Cranksets (339)
- Derailleurs (179)
- Forks (172)
- Groups (29)
- Handlebar Grips/Tape (406)
- Handlebars (400)
- Headsets (196)
- Pedals (460)
- Saddles (493)
- Seatposts (142)
- Shift/Brake Combinations (76)
- Shifters (126)
- Shocks (40)
- Stems (209)
- Other (2221)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
Service kit for 100 hr service (re-adjusting play and replacing wiper).
There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version.
To determine the correct service kit for your post, please copy this link into your web browser:
Kit includes:
- 1x Wiper (with spring)
- 6x Glide pin
- 1x Lower bushing (grey, without line marking)
- 1x Foam ring
- 1x C-clip R12
This BikeYoke allows the use of a standard shock in your Specialized bike.
Stumpjumper 2010-2015
Includes:
- 1x BikeYoke SJ01
- 1x DU bushing
- 1x reducer
- 1x stainless steel bolt
This BikeYoke allows the use of a standard shock in your Specialized bike.
Stumpjumper 2016-2018
Turbo Levo 2016-2018
Includes:
- 1x BikeYoke SJ02
- 1x DU bushing
- 1x reducer
- 1x stainless steel bolt
Designed to simplify thousands of hangers into one universal design that can be easily stocked by your local bike shop. Our hanger is uniquely forged and fully machined from aluminium giving you the toughest hanger possible. We always recommend having a spare to be sure of no missed rides.
- Compatible with all frames designed to accept the SRAM UDH
- Compatible with all MTB and E-MTB drivetrains
- Forged and Fully Machined from 7075 Aluminium
- Supplied with Mounting Screw and Washer
- Thru Axle Pitch M12 x 1.0
Manufacturer’s part number: AC-DRHG-MTB-A4
These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium.
Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time.
Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off.
Clean, simple, and fast!
Replacement for Fox PN:
820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly
820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly
NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)
Get Wild with Extra Stiffness and More Clearance
These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a 6mm allen key fitting on both ends of the axle. This "Get out of Jail" feature might be pretty handy if you manage to chew one end up rushing to put your wheel on when your mates have already set off. We've all been there, and know how much it sucks to miss a ride. Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel isn't falling off.
Axle Dimensions: 156mm length x M14 x 1.5 thread x 15mm.
NOTE: This axle does fit 2021+ (2022, 2023 etc.) 32's and 34's.
Get Wild with Extra Stiffness and More Clearance
These super tough axles are constructed to Rockshox's exact specifications and made from 7075 Aluminium.
Unlike any other fork axles on the market, these feature a 6mm allen key fitting on both ends of the axle. This "Get out of Jail" feature might be pretty handy if you manage to chew one end up rushing to put your wheel on when your mates have already set off. We've all been there....
Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel isn't falling off.
Benefit from the increased clearance without a lever in the way getting wacked by trailside debris!
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date.
We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market.
From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal.
- Weight: 379g
- Platform material: 7075 Alloy
- Profile: 15mm
- Platform: 100mm x 102mm
- Dish: 2mm (concave)
- Pin material: Stainless steel
- Pin width: 3.5mm
- Pin height: 4.5mm
- Axle Material: EN24T Steel
- Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided.
Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
Fits the following Santa Cruz bikes:
- 5010 V1, V2, V3
- Bronson V1, V2, V3
- Nomad V2.1, V3, V4
- Chameleon V5, V6, V7
- Heckler V7
- Heckler E-Bike V8
- Heckler MX E-Bike
- Bantam V1
- Blur TR V1.1
- Blur XC V2.2
- Blur LT V2.2, V2.1c
- Blur V3
- Highball V1, V2, V3
- Tallboy LT V1.1
- Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only)
- High Tower V1 and V2(MY20 & MY21 only)
- High Tower LT V1
- Mega Tower V1
- And Juliana Equivalents
Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. They feature "a get out of jail" 6mm Allen key on the drive side of the axle if you manage to round the non-drive side.
- Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
Fits Yeti Bikes:
- 160E
- Arc
- SB120
- SB140 MY23+
- SB160
Note: Original part for SB120, SB140 MY23+, SB160 is 172mm length, the 174mm axle is still compatible.
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided.
Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key.
- Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
- Note: This axle is not compatible with Evil Bikes
- This axle is very common with a lot of bike brands, please visit burgtec.co.uk for complete fitment info.
- Thread M12 x 1.75mm pitch
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key.
- Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
- Please visit https://burgtec.co.uk/product/trek-184-5mm-rear-axle/ for complete fitment info.
- Thread M12 x 1.75mm pitch
As used by the Santa Cruz Syndicate riders Greg Minnaar, Loris Vergier and Luca Shaw. The Ride Wide Carbon DH Handlebars from Burgtec are the ultimate in control.
- Uni-Directional Carbon
- 800mm width
- 9 degree backsweep
- 4 degree upsweep
- Suggested cut down marks
- Weight: 280g
GXP Boost 3mm Offset Thick Thin Chainring. Awesome chain line plus awesome chain retention enough said.
- 12 spd Eagle compatible.
- Designed and tested in MTB heaven, the Peak District.
- Keeps your chain on!
Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors.
Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again.
- Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm
- Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.
When you've got to finish your bike off right.
The Burgtec Stem Spacers are the perfect finishing kit.
"Make a grip with the fussiest rider on the planet, you must be mad!!"
The Bartender Pro is the next level in grip design for Burgtec.
We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening.
- 31.5mm Diameter.
- 30A Rubber Compound
- Single Lock On
The Goats Grip just went Super Soft.
Prototyped through the 2020 season and based on the World Cup Winning pattern of the Bartender Pro as used by Greg, as well as Nina Hoffman, Danny Hart and Angel Suarez.
- Super Soft Compound
- 31.5mm Diameter
- Single Lock-on
- Tapered Core
When you’ve got to finish your bike off right.
The Burgtec Top Cap, Top Cap Bolt and Stem Spacers are the perfect finishing kit.
Mix and Match to suit your bike.
***Top Cap only works with Burgtec Top Cap Bolt***
Designed to offer a broad range of riders comfortable support and compliance, and shaped for a powerful, efficient pedaling position, the ultralight Amp saddle features an Advanced Forged Composite Technology base and Integrated Rail Design. Comfort is further enhanced with high-elasticity Particle Flow padding, Lightweight Reactive Foam and a pressure-relieving ergonomic center cut-out.
New for summer 2023, a slim single-clamp grip offering great bar feel and low weight, with a unique diamond-grid grip pattern. This 'supa soft' version uses durometer 9A rubber for extra grip when it's slick. See other Dune models for more durable 15A rubber.
The Pilot BA is the union of Chromag's extensive flat pedal design combined with a proven, dual sided SPD compatible cleat engagement system. With a long, 110mm body, the Pilot BA's pins reach beyond the cleat channel of most shoes to provide a secure 5-point pin contact between shoe and pedal. The Pilot BA features our G.3 high-strength chromoly axle system, with a double seal, inner bushing, and outer cartridge bearing.
We've used our knowledge of making stems for almost 20 years to create a new, highest level, Canadian-made bar grabber. There's no doubt the RIZA is our finest stem to date. CNC machined in Whistler, Canada from premium 6061 billet aluminum, it features our new faded edge on the clamp face to help avoid hot spots and stress risers when your bar flexes under load. Also it looks really flippin' nice. The RIZA comes in 31.8 and 35mm clamps and 32, 38 and 45mm lengths.
The RX4+ caliper supersedes the RX4 caliper and builds on 25 years’ experience designing and manufacturing hydraulic disc brakes and transfers the knowledge and skills acquired into the world of Road and Cyclocross dropbar brakes. A precision CNC machined monobloc design results in a stiffer caliper to give unrivalled feel and modulation.
KEY FEATURES
- Dot Fluid Calipers will have Bore Caps with a D etched.
- Mineral Oil Caliper will have Bore Caps with an M etched.
- Calipers to suit dropbar set ups - Flat Mount front & rear & Post Mount
- Calipers designed to fit 140, 160 & 180mm rotors
- Slimline 4 piston lightweight design
- Monobloc design creates a stiffer caliper reducing the fuzzy lever feel and brake pad rub
- Available in Black, Silver, Bronze, Red, Blue, Purple and Orange
- Top entry pad fitting
- CNC machined from 2014 T6 aluminium
***Please note***
Shimano and SRAM brands belong to a third party and have no relation with Hope Technology
RX4+ Caliper is designed to work with Shimano and Campagnolo dropbar brake systems
(Mineral Oil, Shimano recommended for Shimano application, Campagnolo/Magura recommended for Campagnolo)
Shimano Compatible Calipers (RX4+)
Dura Ace Di2 R9270 / R9170 / R9120 / R9200
Ultegra Di2 R8170 / R8100 / R8070 / R8170 / R8020 /
105 Di2 R7170 / R7020 / Di2 R785 / RS685 /
GRX RX820 / RX810 / RX600 / RX400 / RX815 Di2 / RX817 Di2
Campagnolo Compatible Calipers (RX4+)
Ekar / Super Record / Record / Campagnolo H11
SRAM Compatible Calipers (RX4+) dropbar brake systems (Dot Fluid)
Sram Red eTap AXS / Sram Red / Sram Force eTap AXS / Sram Force / Sram Rival eTap AXS /
Sram Rival / Sram Apex / Sram S900
Brake pads include spring clip and pin
Brake pads are dyno tested in-house in Barnoldswick
Available for all our current brakes and older models
All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity
We keep a wide range of pads to suit all our brakes
PEMBREE DBN is an entirely new seat post clamp.
Due to the double barrel nuts DBN provides a consistent clamping force ensuring the bolt remains straight through-out its travel. This is particularly important when clamping dropper posts to prevent pitch points that damage frames and posts.
Machined to exacting standards ensures a precision fit that is critical to secure clamping. DBN seat post clamp is manufactured from aluminium that is 75% recycled, unheard of in the industry.
Machined from stainless steel the precision, custom made bolt provides the core clamping function of DBN.
- Clamp: Aluminium
- Bolt: Stainless Steel TX25
- Barrel Nuts: Aluminium
- Weight: 27g
- Warranty: 5 Years
- Cool Cover: helps reflect heat, so it stays cooler than traditional black saddles
- Center channel cut out aids air flow and keeps blood flowing to all the right places
- Water-resistant
- Royalgel padding
- Rails mounted on elastomers
- Integrated Clip System
Page 1 of 261
Next page