Filter By:
- Rigid (133)
- Suspension (135)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Forks
$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Custom DT RWS Skewer included
- 3.0" max recommended tire size
- Axle to Crown Length: 480mm
- Brake Mount: IS Disc Brake 160mm
- Crown Race: 40
- Defined Color: Black
- Front Axle: 15 x 100mm
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Weight: 750 grams
- Wheel Size: 29-inch
$565.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more.
- 15mm thru-axle with 110mm Boost spacing
- Post-style brake mount
- 1.5" tapered carbon steerer
- Two sets of Three-Pack mounts
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"
$1,019.00
ZEB Ultimate is a whole new breed of fork, designed to challenge the limits and take on the world’s toughest Enduro tracks. Going Ultimate has its advantages—this fork has a stiff, 38mm chassis designed with the Charger 2.1 damper, DebonAir spring technology, SKF Wiper Seals, and Maxima Plush Fluid. It pairs our highest performing, athlete-proven technologies with premium style.
- New, 38mm chassis for increased stiffness and rider confidence
- Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- Charger 2.1 RC2 damper features independent high and low-speed compression adjustments
- Dual Position Air adjustment option to change the geometry of the bike for climbs and descents
- Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel
- Maxima Plush damping fluid reduces friction and silences damper noise
- Ultimate foil graphics package
$450.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness.
When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
$181.00
A day of slicing through sweet ribbons of singletrack on a bike sporting a RockShox 30 Silver will leave you smiling all the way to the bank. Race-proven plushness and ease of setup means more time on the trail and less time tinkering. Lightweight and packed full of legendary RockShox technology, the 30 Silver is sure to boost the level of your ride without boosting your wallet in the process.
- TurnKey damper
- Crown Race: 30mm
- Steerer Tube Length: 265mm
- Positive Spring: Coil
- Negative Spring: Coil
- External Adjustments: Rebound Damping, Low Speed Compression Damping
- Maximum Tire Width: 62mm
- Maximum tire size: 26 x 2.4"
$525.00
The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for.
- 12mm thru-axle, 100mm spacing
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 42mm max recommended tire size
- ASTM Condition 2 - For off-road riding and jumps less than 12-inches
- Includes thru-axle and Whisky Parts Co. compression plug
$550.00
A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience.
- Material: Carbon
- Weight: 520g
- Steer Tube Length: 350mm
- Rake: 50mm
- Axle To Crown: 395mm
- Max Rotor Size: 140mm – 160mm
- Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec - Steer Tube: 5.5Nm
- Torque Spec - Axle: 8Nm
$130.00
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube.
- Axle-to-crown: 26" = 376mm
- Offset: 45mm
- Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm
- Tire Clearance: 26 x 2.1"
- Weight: 26" = 2.1 lb (0.97kg) uncut
$129.99
Origin-8's Cromo-Lite Combo Mountain Fork is seriously versatile. This 4130 chromoly steel fork can be used with 26- or 29-inch wheels, and is suspension corrected for a 100mm 26-inch-wheel fork. With disc mounts and linear-pull brake bosses, even your brake choices are versatile.
$483.00
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package.
Features
- New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available)
- New graphics are easy to read and make a fresh impact
- Motion Control damping featuring low-speed compression adjustment to lockout
- Highly tunable DebonAir spring offers a consistent feel throughout the travel
- Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance)
- Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look
- Offset: 44mm
$537.00
Yari shares the stiff, hard-hitting chassis as the Lyrik and combines it with the updated DebonAir air spring and proven Motion Control damper. The Yari fork is designed to inspire confidence for those hard-hitting enduro and E-MTB riders alike.
- Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- New graphics package for a fresh, premium look
- Motion Control damping featuring low-speed compression adjustment
$843.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible.
- Charger RC damper featuring Low Speed Compression adjust
- DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
- RockShox premium short fender included
- Maxima Plush damping fluid reduces friction and silences damper noise
$1,107.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible.
- ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control.
- Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk".
- DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height
- Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible
- Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature.
- RockShox premium short fender included
$1,054.00
- 35mm chassis at home on the trail - stiff, playful and light, really light
- ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control.
- Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk".
- DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height
- Ultimate Bushing Package maximizes the fork’s bushing overlap, reducing friction and creating the smoothest ride possible
- Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature.
- RockShox premium short fender included
$1,159.00
- 38mm chassis for increased stiffness and rider confidence
- ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control.
- Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk".
- DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height.
- Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible
- Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature
- Includes premium short fender
$537.00
Revelation is all grown up and ready to explore, wherever the trail may turn. Value-packed, the Revelation features an updated DebonAir spring paired with a Motion Control damper and 35mm Fast Black upper tubes.
- Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- Motion Control damping featuring low-speed compression adjustment to firm
- Chassis is derived from the renowned Pike fork
- New graphics package for a fresh, premium look
$109.99 - $139.99
- Replacement urban threadless forks
- Accepts up to 40mm tire width
- Chromoly construction
- 1-1/8" steer tube
- Size: 700C
- Steerer Type: Threadless
- Steerer Length: 300mm
- Material: Chromoly
- Offset: 45mm
- Axle-to-Crown: 405mm
- Race Diameter: 30mm
- Axle: QR
$259.99
- Unicrown design with Tange Infinity CrMo steel tubing
- Single eyelets pannier rack mounts and mini rack mounts
- Fits 700c x 45mm tires with fenders
- 15x100mm thru axle and International Standard disc brake mount
$419.95
Lightweight, stiff, compliant, and available in three sizes to give you more choices for converting your bike over to rigid. With 34mm carbon legs and forged aluminum crowns and dropouts, the Rock Solid family of forks will make your machine a precise, feather-weight, singletrack screamer. 490mm, 465mm, and 445mm models are available.
- Designed for 26", 27.5", or 29" wheel MTB applications, disc only (74mm post-mount)
- 34mm carbon legs with forged aluminum crown and dropouts
- Max Rotor Size 185mm or may void the warranty
- 3 different sizes for optimal ride height.
$429.00
XFusion’s RC32 series family is our all-never 32mm stanchion, 27.5 specific, XC, and trail fork. It has up to 120 mm of travel, remote compatible, or lever-actuated lockout. In addition to the performance features, the RC32 is offered with either 1 1/8” or tapered steer tube configurations.
FEATURES
- The RC damper has low-speed compression and near-lockout firmness
- Remote Lockout Capable
SPECIFICATIONS
- Weight: 4.1 pounds/1870 grams
- Wheel Size: 27.5 inch
- Travel: 130mm (ITA 80/100/130mm)
- Stanchion: 32mm Aluminum
- Spring: Air
- Damper: RC Cartridge Damper
- Adjustments: Compression(open to firm), Rebound, Air Spring
- Steerer: Taper Standard
- Axle: 9mm
- Colors: Flat Black
- Axle to Crown: 510mm @ 120mm of travel
- Offset:46mm
- Max Rotor Size: 180mm
$429.00
XFusion’s RC32 series family is our all-never 32mm stanchion, 27.5 specific, XC, and trail fork. It has up to 130 mm of travel, remote compatible, or lever-actuated lockout. In addition to the performance features, the RC32 is offered with either 1 1/8” or tapered steer tube configurations.
FEATURES
- The RC damper has low-speed compression and near-lockout firmness
- Remote Lockout Capable
SPECIFICATIONS
- Weight: 4.1 pounds/1870 grams
- Wheel Size: 27.5 inch
- Travel: 130mm (ITA 80/100/130mm)
- Stanchion: 32mm Aluminum
- Spring: Air
- Damper: RC Cartridge Damper
- Adjustments: Compression(open to firm), Rebound, Air Spring
- Steerer: Taper Standard
- Colors: Flat Black
- Axle to Crown: 510mm @ 120mm of travel
- Offset:46mm
- Max Rotor Size: 180mm
$769.00
With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Performance delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you.
- 700c chassis with clearance for large volume tires (50 mm max)
- Black anodized 7000 series aluminum stanchions and 12x100mm bolt-on thru axle
- FLOAT EVOL Air Spring and GRIP damper, featuring three on-the-fly settings - Open, Medium, and Firm
- Lightweight air spring optimized for short-travel
- Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels
- Integrated full fender mounts (700c x 45 mm max with fender)
$1,069.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$989.00
The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately.
- Black anodized upper tubes
- FIT GRIP damper and FLOAT EVOL air spring
- Three on-the-fly compression damping positions: Open, Medium, Firm
- Performance Series black-on-black graphics package
$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,139.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses.
- Genuine Kashima Coating on upper tubes
- FIT GRIP2 Damper and FLOAT air spring
- E-Bike Chassis
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$1,089.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities
- Kabolt Thru Axle
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability.
- The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs
- Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality
- The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release
- Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping
- Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button
- The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding
$18.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$169.99 - $189.99
Laterally stiff and fine riding steel-lugged cross fork. Features a sloping lugged crown with cutouts on outside tangs, long inside tangs, and an International Standard disc tab.
- Tange Infinity chromoly steel blades and steerer - Rack eyelets for fenders and braze-ons for low-rider panniers
- 1 1/8" threadless steerer
- 350mm long steerer
- 44mm rake
- 400mm axle to crown
- 60mm inside width
- Lugged Cross fork to match Double Cross Cyclocross frames
- Lugged crown with Tange CrMo construction
- Features eyelets for front rack and braze-ons for low-rider panniers
Page 1 of 9
Next page