Skip to main content
 Call 954-990-0836  |  Whatsapp chat  954-804-1350  |  Hablamos Español

Filter By:

Aero

Sunlite Bull Horn Bars
$25.99
Building up an urban fixie or townie bike? Then you just have to have the classic Bull Horn Bars from Sunlite. They're made from aluminum with a steel center sleeve, so they're light, stiff and durable.
Profile Design Stoker 26 Base Bar
$51.00
Profile's Stoker 26 Base Bar features a 26.0mm diameter the entire length across the bar, allowing the widest aero bar clamping area that Profile makes. This makes the bar ideal if you have a wide aero position or need a comfy stoker bar for your tandem. Made from double-butted 6061 aluminum, the Stoker 26 is light, not to mention shot peened and anodized for added strength and durability. Plus, it's pre-drilled for internal cable routing for aerodynamics and a clean look.
Origin8 Flash II Aero
$59.49
- Traditional compact road bar available in multiple widths - Flattened aero top section for enhanced comfort and grip - AL6061-T6 alloy construction - ISO-Road safety certified
Profile Design WING/10a
$97.00
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
Giant Giant Contact SLR Aero Handlebar
$330.00
Ultra-light composite bar improves aero performance and enhances aesthetics with wind tunnel inspired design. FEATURES - 2018+ Propel proprietary shaped handlebar - Requires the usage of 2018+ Propel Contact SL / SLR Aero Stem - Ultra-light carbon composite - Bar-end Di2 junction box compatible - 72mm reach - 132mm drop - Clamp: Only compatible with Giant Propel AeroSystem Stem - Weight: 225g (420mm)
Profile Design Aeria AL Evo
$370.00
The Aeria Evo AL is an update of our proven Aeria bar. We have evolved the fit range of the bar with New Evo brackets, Ergo armrest and 35a extensions. The new brackets add the ability to tilt the entire assembly, as well as letting the armrest go much narrower than the first generation design. The new Ergo armrest increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options. Specifications: - Base Bar: Aeria Aluminum UCI Compliant 3:1, aerodynamic 6061-T6 Hydroformed aluminum wing has zero drop from clamp to brake extensions. Combined with a shorter reach, this design translates to better control. - Bracket: Evo The Evo bracket allows you to upgrade an existing Aeria bar with a massively increased fit range as well as builtin tilt. It is compatible with the existing spacer kit and armrests. - Armrest: Ergo Ergo is the core of our new family of fi t and comfort focused armrests. It offers a smoothly curved shape designed to comfortably cup the elbows while providing good support and control. The bolt pattern yields 48 possible configurations just by moving the armrest. The pads are available in two thicknesses - 5mm and 10mm - allowing riders to tune the fit and feel to their own preference. The Ergo is compatible with all current aerobars and earlier models that used the F19, F22, F35 and F40 armrests. - Extension: 35a The new range of extensions has evolved from our well proven T-Series. They have been designed to offer distinct fi t options. We have also adopted a new naming system where by the name gives the angle and material of the extension. Thus the 35a is a 35° bend in aluminum. The 35a extensions offer a 35deg ski bend shape. They are 400mm long to allow a wide range of riders to fit. The cable routing is designed to exit from the rear of the extension. - Basebar Width: 42cm (Center-to-Center) - Basebar: 6061-T6 aluminum - Pursuit Reach: 157.5mm (center to tip) - Bracket: Aeria Evo (6061-T6 aluminum) - Armrest: Ergo - Armrest Stack: 56mm to 80mm (5mm Increments): Risers / Bolts sold separately - Armrest Offset: -66mm to 1.5mm (7.5mm Increments) - Armrest Width: 100mm to 266mm (18.5mm Increments) - Extension Length Adjustment: 40mm - Extension Length: 400mm - Extension Height: 80mm - Extension Angle: 35° - Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable - Armrest Rotation: 7° - Bracket Tilt Adjustment: 0-10° - Weight: 1012g
Profile Design Svet R
$439.00
Reversible basebar wing improves fit for bicycles with smaller headtubes. Two-Way Fit System: Standard fit provides a low drop for aggressively positioned athletes who favor or fit needs dictate a low out-of-the-aerobars position which translate to fast, aggressive riding style. Flip the bar for an elevated position ideal for riders requiring higher stack in their cockpit position and higher relative pursuits. - Straight Brake Extensions: Straight, ergonomic brake extensions help maintain control while remaining aerodynamic. - Clean Cable Routing Pre-slotted internal cable routing on both sides for a clean profile. Di2 Compatible. - Weight: 220g (42cm) - Width: 40cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 100, 120, 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 160mm (center to tip) - Pursuit Drop: ±20mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No
Zipp Vuka Aero
$968.00
Zipp’s Vuka Aero redefines aero handlebar conventions while being compatible with modern-day aero bikes. The current redesigned Vuka Aero builds on the technological foundation of aero excellence set by the original version. Vuka Aero is an integrated aero bar that features market-leading adjustability; it can be used with any stem to help you find your ideal position on the bike. The airfoil used in the Vuka Aero is based on the shape of the SL-70 Aero road bar. The result is an aero bar that’s stiff and streamlined while maintaining the UCI’s 3:1 aspect ratio requirement. - Market-leading adjustability in pad fore-aft, width, height, and angle - Integrated Carbon Aerobar works with any 31.8mm clamp stem - Integrated SRAM eTap AXS Blip box mount in the Center Cap - Rapid Routing cable exits are positioned for easy installation of brake cables - Vuka Aero ships with base bar, extension clamp, and armrest clamp - Extensions sold separately
Page 1 of 1