Wheels

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible - Rotor lockring not included - Hub Center to Flange: 30.0mm - Hub Drilling: 32-hole - Flange Diameter: 92.5mm - Drivetrain Speeds: 8 - Spoke Interface: J-Bend

With stunning acceleration, the new DURA-ACE R9270 C36 wheelset will change the way you experience climbs, corners, even stop lights. This is because it isn't just how much a wheel weighs but where the weight is on the wheel that matters. The all-new C36 design shaves mass at every opportunity but especially at the rim. The result is a lively wheelset that can transform your ride. With both a lighter, wider all-carbon rim and a lighter hub, the new DURA-ACE C36 won't shy away from a day of climbing. The new rim is 36 mm deep and still delivers good aerodynamic efficiency despite its gossamer weight. Meanwhile the hub features an alloy FREEHUB body and new engagement mechanism for increased rigidity. - 36 mm height full carbon rim - Internal rim width: 21 mm - DIRECT ENGAGEMENT - Compatible only with Shimano road 12-speed cassette sprockets

- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.

Who knew we could make a thru axle disappear? The Maxle Stealth offers a light, low profile alternative to Maxle Lite. Features - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench

Fastest XC Wheels In the Real World 1240 grams is an obscenely light weight when talking about mountain bike wheelsets, the kind of weight that XC racers dream about. But light weight alone is no longer enough. So, we engineered the new Control SL wheels to be sharp handling, smooth riding, extra durable, and 22% less likely to pinch-flat your tires, in addition to being some of the lightest weight production wheels on the planet. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook 4mm FlatTop design. Compatible with tire inserts. - Rim Width: 29mm internal - Front Hub: Alloy body, 15mmx110 thru-axle, 19 and 31mm OD end cap options included. Max Rotor Size <200mm - Front Spoke Pattern: DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross - Rear Hub: CNC-machined alloy body, SiNC Ceramic Bearings, premium-quality DT 180 internals and 36t quick engagement ratchet system cassette, includes SRAM XD Driver and 148 end caps. Max Rotor Size <200mm - Rear Spoke Pattern:DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross - Bearing Type: SiNC Ceramic Sealed cartridge - Nipple Type: DT Swiss Pro Lock Hexagonal Alloy 14mm 2.0mm - Total Wheelset Weight: 1240g - System Weight Limit: 275lbs/125kg

- Green colored spoke prep remains pliable for adjustments - Helps keep spoke nipples from loosening

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.

- Elite Series convertible cyclocross/gravel hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Use: Rear Hub - Drilling: 28H - Material: AL6061 - Color: Blk - Brake Type: 6B J-Bend Spoke/Quick Release Axle: - OLD: 135mm - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 32.95mm - LTF-R: 48.45mm - CTF-L: 34.7mm - CTF-R: 19.2mm Straight Pull Spoke/Quick Release Axle: - OLD: 135mm - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 36.2mm - LTF-R: 50.1mm - CTF-L: 31.45mm - CTF-R: 17.55mm J-Bend Spoke/12mm Thru-Axle: - OLD: 142mm - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 36.45mm - LTF-R: 51.95mm - CTF-L: 34.7mm - CTF-R: 19.2mm Straight Pull Sple/12mm Thru-Axle: - OLD: 142mm - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 39.7mm - LTF-R: 53.6mm - CTF-L: 31.45mm - CTF-R: 17.55mm

Get rolling again with a replacement freehub body for your Mavic wheels. - For Mavic ID360 hubs

- Rim brake only - Sealed bearing hubs (QR 100) - Dynamic Balanced Lacing technology - Tubeless Ready rim - Does not include QR, tape, or tubeless components

- Strong nylon reinforced PVC for a secure fit - Handles high-pressures; does not rot - 0.5mm thick

- Alloy 700c rims - Tubeless compatible using supplied rim strips and valves - 23mm wide rim for better tire performance - 30mm rim height - Stainless steel, straight pull, double butted spokes - Dynamic Balanced Lacing provides significantly higher transmission stiffness vs. traditionally laced wheels - Alloy locking nipples - Giant Alloy hub shell with pawl based driver - Centerlock disc compatible

The wheel that first merged aero with high volume tires, designed to make you faster on all road surfaces. Proven on the cobbles of Paris-Roubaix. - Intended Use: Road, All-Road - Inner rim width: 25mm - Aero Optimized Tire Size: 27 – 32c - Tubeless-only AERO FOR ALL ROADS The SES 4.5 AR is an uncompromising aero wheel designed specifically for disc brake equipped bikes and large volume 27 to 30mm tubeless road tires. Rebellious, unconventional, and pioneering are words that describe the one of its kind SES 4.5 AR. Conceptualized for the cobbles of Paris-Roubaix through our partnership with Team Dimension Data, the SES 4.5 AR was developed to deliver top shelf aero performance, stability, and comfort for virtually any road surface. The SES 4.5 AR is available as a tubeless clincher and tubular model rim. The SES 4.5 AR borrows from ENVE M Series carbon mountain wheel tubeless technology and features hookless beads. Hookless beads improve aerodynamic performance by aiding airflow from tire to rim as well as allow for the best tubeless tire performance possible. Like all Smart ENVE System aero wheels, the front and rear rims are specifically designed for the airflow seen at the front and back of the bike. As such, the front rim is more shallow and wider to maximize stability and the rear is deeper and narrower to aid in drag reduction. In addition to dissimilar geometries, the SES 4.5 AR features a disc brake specific construction that saves weight, improves strength, and creates an unprecedented ride quality.

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Threadless spoke blanks - Nipples sold separately

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

The H 1950 CLASSIC is the best possible wheel for any adventure, whether it's on narrow city streets, bumpy forest roads, or discovering what's at the end of the map. The technology of the H 1950 CLASSIC has been specifically developed for e-bikes and gives you the reliability and robustness you need when you're in the middle of nowhere. The 25mm rim width provides plenty of support, ensuring that whether you have an e-MTB, e-Urban, or a fully-loaded touring bike, the H 1950 CLASSIC will be your trusty companion.

High end, bladed straightpull spokes and the most reliable and light weight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip and lightweight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them. So the PRC 1400 SPLINE 35 is ready for anything, are you? - Spline 240S based hub

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - Weight: starting at 20g for 64 nipples

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. - End Cap Included

Aluminum

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance. Built on reliable 350 hubs with 36-tooth ratchet engagement. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications

Elite-level aluminum wheels for XC/trail Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black + red anodizing - Rim width: 21mm - Rim depth: 19.5mm - Spoke material: Sapim stainless steel - Spoke butting: 2.0/1.6/2.0 - Spoke length: 166mm - Spoke pins: hollow 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: cobalt, 6061-t6 - Front hub bearing: sealed cartridge 6804 (x2) - Front hub end caps: 15mm (installed), 9mm (included) - Rear hub material: cobalt, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, alloy - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1735g per set - Weight: 27.5-inch, 1650g per set - E-bike compatible: urban/XC e-bikes up to 350 watts max

Replacement Freehub body for I9 Hydra, I9 1/1, and Crankbrothers Hubs - Shimano MS/I9 Hydra

- Replaces freehub body on current Cobalt or Iodine wheels with SRAM XD compatible body