Mountain Frames

ARE YOU THIS RIDER? Do your friends ask if you intend to ride the chairlift when you invite them out for a 'few' park laps? Do your top routes frequently involve pushing up and down trails that aren't on any map? Do your favorite rides begin or end with headlamps, an ice chest, and great friends? Does your bike have to do everything well to get you there and back again? If you think you might be this rider, then Occam should be your bike. - Intended Use: Trail To Light Enduro LINKAGE UPDATE Occam uses a new two-part linkage design. Fewer pieces mean fewer interfaces, greater rigidity, and a lower chance of something working loose. Additionally, we have created a space in the axel and filled it with a handy 4 key multi-tool which is held securely in place with magnets. Always have the most-used tools close at hand for quick tweaks. INTERNAL CABLE ROUTING Occam has our latest, fully internal cable routing, using silicon plugs at the frame entry and exit points and clever conduits linking the front and rear triangle so your cables are fully protected. ASYMMETRICAL DESIGN Instead of using a less-efficient "shock tunnel", the Occam offsets the shock to the left side of the frame, allowing the right-side support to be more central and more efficiently deal with the suspension forces acting on the front triangle. This solution enables us to tune the stiffness of this high-stress area without adding unnecessary weight. THE ASYMMETRIC/OFFSET DESIGN OFFERS UNIQUE ADVANTAGES BEYOND STIFFNESS AND LOW WEIGHT. Avoiding an interrupted seat tube gives more space for dropper posts plus improves access to the shock controls. Additionally, the tidy design leaves room for a water bottle with easy left-side access.

FOCUS ON FAST Rallon was forged on the racecourse and is the obvious choice of our EWS race team, but Rallon is always ready for fun outside of the tape and loves fast laps with friends, high-5's and near misses. Fearless, Rallon is up for hitting the biggest gaps in the park, smashing berms, and scorning braking bumps. Forget limits, forget distractions, just focus on fast. ENDURO RACING HAS EVOLVED AND THE RALLON HAS EVOLVED TOO. - Enduro racing has evolved with more aggressive tracks and the Rallon has evolved too. Longer and slacker than ever, Rallon also has more standover to give more choice over frame sizing. Totally revised suspension kinematics give a more progressive suspension curve which, combined with 160mm of rear travel is hard to beat; fast and agile in the turns with plenty of control and traction in the rough. Add the beefy Fox 38 fork and Rallon is ready for whatever you have in mind. WHEN THINGS GET STEEP YOU WANT TO DROP YOUR SADDLE DEEP OUT OF THE WAY AND JUST FOCUS ON FAST! - More space to move your body means more control and more control means more speed. But low saddles mean long droppers which need short seat tubes. The trick is achieving this without affecting either seat post insertion or frame geometry. With its steep seat tube and deep insertion Rallon has one of the lowest standovers around, meaning lots of space for your choice of long travel dropper posts. Get that saddle right out of the way when things get steep and deep, long travel droppers are the only way. PRECISION TRACKING IS KEY FOR FEEL AND GRIP - It is possible to have a frame which is too stiff to track the terrain efficiently. Manipulating the carbon weave allows us to control flexibility without sacrificing strength, giving a perfectly balanced front and rear triangle stiffness. A lot of technology, modeling, and testing translates to confidence and grip on rough cambered terrain and valuable fractions in race runs. FULLY SEALED BEARINGS - Everyone hates changing bearings. Normally bearings fail due to being dirty, not overloaded, and with Rallon we have worked hard to seal all the bearings. Clean bearings last longer and also keep the suspension working optimally when the conditions are filthy. ASYMMETRY - The left side support strengthens and stiffens a high-stress area. Instead of using a less-efficient "shock tunnel" the Rallon design offsets the shock 12mm to the right side of the frame, allowing the asymmetrical support to follow a more direct path. This straight line that closely follows the shock mounting is the most efficient way to neutralize suspension forces on the front triangle. LOCKR FRAME STORAGE - Leave your pack at home and just focus on fast! Rallon is packed with clever storage spaces for all the essential tools and water you need for shorter rides or enduro races. Packless runs are fast and fun. THREE LOCKR ZONES - In the Down tube LOCKR zone we have two sealed bags, with tube, tyre levers, and space for two C02 cartridges. Additionally, the main pivot and rear axle are filled with cleverly designed tools, held securely with magnets. With a tube, tyre repair, tube, hex keys from 3 to 6mm, and a T25, all held securely in space, Rallon is fully equipped. MORE SIZING OPTIONS: - Rallon is available in four sizes, S, M, L, and XL, however with one of the shortest seat posts around you can pick between sizes to get your preferred reach. Rallon is designed to work with a long travel dropper post, so choose a larger size to maximize stability, or go with a smaller size for a more playful Rallon.

HIGHLIGHTS Engineered with a full composite frame, this 29er has 100mm of rear suspension travel. The linkage-driven, single-pivot FlexPoint Pro rear suspension makes room for shorter chainstays to improve climbing capabilities and overall agility. Other updates include new 29er-specific XC race geometry with a longer reach and a slacker headtube angle plus a new design for internal cable routing. ADVANCED COMPOSITE High-performance grade raw carbon material is used to produce this custom frame material in our own composite factory. The mainframe and rear swingarm are handcrafted with monocoque construction for optimized stiffness-to-weight and an ultra-responsive ride quality. FLEXPOINT PRO SUSPENSION Developed as superlight rear suspension for XC bikes that demand efficiency, control and responsive handling, this linkage-driven, single-pivot system delivers 100mm of rear-wheel travel. It's engineered with a full-composite swingarm to minimize frame weight. XC RACE GEOMETRY The superlight composite frame is optimized for efficiency and control with an updated 67.5-degree head tube angle, longer reach, and a 110mm suspension fork for fast, technical XC performance. OVERDRIVE Giant's proven oversized fork steerer tube technology. Designed to provide precise front-end steering performance, the system's oversized headset bearings (1 1/2" lower and 1 1/8" upper) and tapered steerer tube work in conjunction to provide optimal steering stiffness. ADVANCED FORGED COMPOSITE A state-of-the-art high-pressure molding process is used to produce the composite rocker arm, making it lighter, stiffer and stronger than aluminum. POWERCORE A massively oversized bottom bracket/chainstay area features a fully integrated, 92mm bottom bracket design. Asymmetric chainstays provide additional stiffness on the driveside and stability on the non-driveside. INTEGRATED CABLE PORTS New design for internal cable routing offers a clean look and performance for derailleur, brake, and dropper post cables and housing.

Engineered with a full composite frame, this 29er has 100mm of rear suspension travel. The linkage-driven, single-pivot FlexPoint Pro rear suspension makes room for shorter chainstays to improve climbing capabilities and overall agility. Other updates include new 29er-specific XC race geometry with a longer reach and a slacker headtube angle plus a new design for internal cable routing. ADVANCED COMPOSITE High-performance grade raw carbon material is used to produce this custom frame material in our own composite factory. The mainframe and rear swingarm are handcrafted with monocoque construction for optimized stiffness-to-weight and an ultra-responsive ride quality. FLEXPOINT PRO SUSPENSION Developed as superlight rear suspension for XC bikes that demand efficiency, control and responsive handling, this linkage-driven, single-pivot system delivers 100mm of rear-wheel travel. It's engineered with a full-composite swingarm to minimize frame weight. XC RACE GEOMETRY The superlight composite frame is optimized for efficiency and control with an updated 67.5-degree head tube angle, longer reach, and a 110mm suspension fork for fast, technical XC performance. OVERDRIVE Giant's proven oversized fork steerer tube technology. Designed to provide precise front-end steering performance, the system's oversized headset bearings (1 1/2" lower and 1 1/8" upper) and tapered steerer tube work in conjunction to provide optimal steering stiffness. ADVANCED FORGED COMPOSITE A state-of-the-art high-pressure molding process is used to produce the composite rocker arm, making it lighter, stiffer, and stronger than aluminum. POWERCORE A massively oversized bottom bracket/chainstay area features a fully integrated, 92mm bottom bracket design. Asymmetric chainstays provide additional stiffness on the drive-side and stability on the non-drive-side. INTEGRATED CABLE PORTS New design for internal cable routing offers a clean look and performance for derailleur, brake and dropper post cables and housing.

This versatile trail frame features a full composite front and rear triangle fitted with a new Maestro suspension system that offers 5mm more travel than the previous generation. The Advanced Forged Composite rocker arm has a flip chip that allows you to adjust frame geometry. Choose steeper or slacker head tube and seat tube angles and either a 35mm or 45mm bottom bracket drop to adjust the handling for your riding style and terrain.

Trance X Advanced Pro 29 Frameset - Advanced-Grade Composite front and rear triangles - 135mm Maestro suspension - Flip chip - 12 x 148mm thru-axle

The Twostroke 01 is a progressive, compliant and confidence-inspiring fast hardtail mountain bike. Its TCC-designed Carbon frame has radical geometry for steep and loose terrain, wide tire clearance, integrated fork stopper and frame protection, plus internal cabling and provision for a dropper post.