Filter By:

  • Show More Brands
  • Show Fewer Brands

Handlebars

3T Clip-On Team Aerobar
$149.99
3T Clip-On Team Aero Bars - For adding aerobar extensions (sold separately) to suitable bars with 31.8mm clamp diameter - Comes with clamps, cradles, silicone pads, and hardware
3T Ergoterra Team
$329.99
3T's Ergoterra is wide, ergonomic and designed specifically for cyclocross. This carbon bar's flared drops angle outwards by six degrees for comfort and control over rough terrain. A reinforced central section on the top adds stiffness as well as strength for the option of mounting cross top bar brakes. It has a compact drop and reach, perfect for sprints and reaching your brakes at all times. - Viewed from above, the drops angle outwards by 6° - 45cm model is 42cm at the hoods, while the 47cm model is 44cm at the hoods - Compound-curved bends preserve the vertical alignment of brake/shifter levers at their mounting point, so outward flare does not alter shifters’ ergonomics - The 31.8 mm center section is extended and reinforced to mount cyclocross top brake levers - On rough ground that jostles the rider’s handhold, Ergoterra offers more lateral clearance for the forearms, helpful for run-ups
3T Ergonova Team
$349.99
3T's Ergonova Team Handlebar features a wider, flatter top section that provides more surface area for your hands. A tight radius where the brake lever sits and a gradual bend make it easy to reach your levers while in the drops. Carbon fiber construction makes it lightweight, strong, and stiff for sprinting and climbing. Cable grooves on the underside provide a smooth feel when you're on the tops.
3T Aeronova Team
$350.00
The Renaissance Man of handlebars, 3T's full carbon Aeronova Team does it all. The mega-wide top section is just barely UCI legal, taking full advantage of the 3:1 rule for maximum aero advantage. The elongated, wing tubing also makes for an ergonomic grip when the road tilts up. Feathery light and stiff, the Aeronova is master of the mountains as well as the finish line chute. Internal cable routing keeps the tape-free tops aero and looking fresh, and 127mm drops for a short and shallow reach provide a confidence boost during sprints and descents.
3T Ergosum Team
$350.00
You'll love the shaping of 3T's Ergosum Team handlebar. A tight radius where the brake lever sits and a gradual bend make it easy to reach your levers while in the drops. Its carbon fiber construction is lightweight and strong. Double cable grooves provide a smooth feel when you're on the tops.
3T Superergo Team Stealth
$350.00
Since its introduction, the most common feedback on our Ergonova drop bar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Aeronova LTD
$399.99
The Renaissance Man of handlebars, 3T's full carbon Aeronova LTD does it all. The mega-wide top section skirts under UCI rules, taking full advantage of the 3:1 rule for maximum aero advantage. The elongated, wing tubing also makes for an ergonomic grip when the road tilts up. Feathery light and stiff, the Aeronova is a master of the mountains as well as the finish line sprint. Internal cable routing keeps the tape-free tops aero and looking fresh, and 127mm drops provide a short and shallow reach for a confidence boost during accelerations and descents.
3T Superleggera LTD Stealth
$425.00
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 166g - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Vola Team
$575.00
Everyone's biometrics are different; no two cyclists should conform to the same TT set up. Comfort (we're talking about power-production) combined with aerodynamics, yields speed. You need the combined forces of both, and to do so you need to find your optimal position, which is why 3T designed their Vola LTD cockpit to be highly adjustable, not to mention light, stiff, and aero. - Narrow, aero-optimized base bars are built with 3T carbon, cutting weight by huge margins - The super-low aero position favored by time trial specialists is possible with extension clamps mounted on the underside of the base bar - Arm pad stack height above the stem center line ranges from 30mm in the low position, to 97mm using all the included spacers in the top-mounted position - Width between the arm pads ranges 220—340mm, measured at pad outer edge - Arm pad reach can be set 20—70 mm ahead of the basebar center, measured at pad front edge - The arm pads rotate in their clamps - A reinforcing bridge is included for rigid, shake-free set-up, that can also double as a convenient computer clamp - Carbon base bar - Carbon 3T Comfort Cradle with neoprene pads - Aluminum aero extensions - Weight: 810 grams in the "low position" - UCI legal
Answer Products Alumilite Handlebar
$32.00
Answer's Alumilite handlebars provide ample width and rise to fit a 25.4mm stem clamp size. - Weight: 325g - Upsweep: 4° - Backsweep: 8°
Answer Products ProTAPER 750 Handlebar
$59.99 - $65.99
Answer's ProTAPER 750 bars are competition-proven to deliver the strength and stiffness you need to control the most challenging trails and courses, while remaining lightweight to edge out the competition. - Backsweep: 8° - Upsweep: 4°
Answer Products ProTAPER 810 Handlebar
$59.99
Answer's ProTAPER 810 bars are competition-proven to deliver the strength and stiffness you need to control the most challenging trails and courses, while remaining lightweight to edge out the competition. Wide, 810mm width keeps you in command when the trail tries to shake you off. - Backsweep: 8° - Upsweep: 4°
Answer Products ProTAPER Carbon 750 Handlebar
$149.99
Take back control with Answer's ProTAPER Carbon 750 bar. Its unidirectional carbon layup is durable and lightweight, and helps isolate high-frequency vibration for less hand and wrist fatigue. Answer makes these bars using an EPS bladder layup process that delivers more consistent wall thickness, which means you get more bang for your carbon buck, combining greater structural integrity with real weight savings. It's the whole package. - Backsweep: 8° - Upsweep: 4°
Answer Products ProTAPER Carbon SL Handlebar
$170.00
- Continuous Lay-Up and Curing - One piece Lay-Up creates dense composite layering, consistent - material wall thickness - Increased strength for better performance - 15% lighter bars - 145mm Grit Grip finish at bar ends.
Atomlab DHR Riser Bar
$58.17 $76.95 24% Savings
- Extra wide butted, heat treated 2014 aluminum for All Mountain to Downhill use
Atomlab Pimplite 3-inch Riser Bar
$69.95
- High-rise, super strong butted, heat treated 2014 aluminum - Sweep: 7° up, 9° back
Azonic Flow Riser Bar
$64.99
- Strong, light Freeride bar constructed of double butted 7050-T6 aluminum - Anodized finish - Upsweep: 5° - Backsweep: 7°
Chromag FU40
$95.00
All Mountain / Freeride / Dirt Jump For those who prefer more rise, Chromag didn't just put more bend in an existing bar stock. The FU40 Hi-Rise handlebar features a specific wall profile optimized for the additional length and torque that corresponds to its shape. Premium quality 7000 series alloy for the best strength to weight ratio.
Chromag Fubars OSX Handlebar
$95.00
Chromag's original all-of-the-above riding style handlebar, the Fubars OSX is made with premium 7000 series alloy. Weighing in at a race-light 310 grams, it features a low profile rise, and dialed 5° upsweep, 8° backsweep orientation.
Chromag OSX 35
$99.00
DH / Freeride / All Mountain Chromag utilizes the 35mm clamp size to create a wider, stronger bar in the same weight class as its 31.8 counterpart - the Fubars OSX. The OSX 35 is made from 7000 series aluminum. It provides the best strength to weight ratio possible. This is a strong bar best suited to DH/Freeride or trail riding. At 800mm it is our widest aluminum bar. Same perfect fit as the original OSX, with 25mm rise, 5-degree upsweep and 8-degree back sweep.
Chromag BZA Handlebar
$181.00
Featuring a weight savings of 25% compared to aluminum bars, Chromag's BZA riser bar is wide, stiff and rowdy. Intended for everything from XC to DH, it features unidirectional fibers for vibration damping. - Upsweep: 5° - Backsweep: 8°
Chromag Cutlass
$181.00
All Mountain / XC The Cutlass bar crosses categories from XC to Enduro with a 31.8mm diameter and width of 780mm. 220g of premium quality unidirectional carbon fiber ensures that this bar is about reliable strength and durability with a responsive feel. It features a 25mm rise for aggressive rider position tuned with a 5° upsweep, 8° bend orientation. The geometry of this bar now matches our OSX perfectly.
Crank Brothers Cobalt 3 Handlebar
$85.00
Grab Crank Brothers' Cobalt 3 Bar and take charge of the trail! It's constructed from 7050-aluminum to keep the weight down and the stiffness up. You'll also love the option of either 8 or 15mm of rise, letting you find the ideal position for climbing up, and ripping back down.
Crank Brothers Cobalt 11 Handlebar
$160.00
The Crank Brothers Cobalt 11 Handlebar is the perfect weight-saving, stiffness-enhancing upgrade for your prized bike! It's constructed from high modulus carbon for an unreal stiffness-to-weight ratio and the choice of 8 or 15mm of rise lets you find the ideal position for climbing up and ripping down.
Crank Brothers Iodine 11 Handlebar
$160.00
Keep your all-mountain rig light and prime for shredding with Crank Brothers' Iodine 11 Riser Bar! Thanks to its high-modulus carbon construction, it's the perfect weight-saving, stiffness-enhancing upgrade for your trail-dominating machine. You'll also love its 30mm of rise that puts you in the ideal position for climbing up and ripping back down. And, did you check out those graphics? Classy.
Deda Elementi Deda Dritto Fixie Flat Bar
$33.29
- Strong and reliable 6061-T6 aluminum construction designed for urban-fixie use - Narrow 500mm (19.7") width perfect for the tarmac - Polished silver with black graphics
Deda Elementi Crononero Alloy Base Bar
$77.90
- Precision-drawn and hydroformed 6061-T6 aluminum construction - Performance designed base bar for TT/Triathlon use (also great urban/messenger bar) - 1-piece, aero-profile base bar with wide stem-interface bulge area accepts 31.8mm clip-on extensions
Deda Elementi Pista Alloy Track Bar
$95.90
- Straight-gauge 6061-T6 aluminum construction - Purebred classic track bar with an updated 31.8mm bar-clamp diameter - Deep drop and reach profile for true sprinting performance - Matte black with silver/white graphics - 280g @ 42cm: drop/reach are measured center-to-center, width is measured outside-to-outside
Deda Elementi Velocita CrMo Track Bar
$103.29
- High-polished, chrome-plated CrMo construction - Purebred classic track bar in either 31.8mm or 26.0mm bar-clamp diameter - Deep drop and reach profile for true sprinting performance - 654g @ 42cm(26.0mm): drop/reach are measured center-to-center
Deluxe Welcome USA Handlebar
$84.99
Deluxe Welcome USA BMX Handlebars. Proudly made in the USA. Ready to take a good ol' American beating, then stick the next landing. - Weight: 912g - Width: 29-inches - Material: Steel - Upsweep: 1° - Backsweep: 12°
Page 1 of 11 Next page